4-electrical and 6-optical Transverse Watertight Composite Cable Spec.
1. مخطط الهيكل
2. Type: RTFK-6 6×1.3+4B1.3
3. تصميم الكابلات
1. سلك الطاقة
1.1 Conductor: use stranded copper wire7×0.48.
1.2 Insulation: special high temperature resistant material, heat resistance≥125℃ nominal outer diameter :3.1mm.
2. Optical unit (4-core) optical fiber: single-module G652, 4-core, steel tube 1.5mm+Sheathnominal outer diameter 3.1mm.
Cabling: refer to the figure, wrapping aluminum plastic composite belt, nominal outer diameter :9.5mm.
3. Inner sheath: polyurethane, nominal thickness: 1.2mm, nominal outer diameter :11.9mm.
4. Reinforced layer: reinforce by aramid knitted, nominal outer diameter: 13.1mm.
5. Outer sheath: foam TPE, nominal outer diameter :22.5mm.
• التطبيقات الرئيسية
This cable is used for power supply and signal transmission of underwater equipment in the ocean.
• ظرف العمل
1. درجة حرارة العمل المحيطة: -20 ~ + 70 ℃؛
2. الحد الأدنى من نصف قطر الانحناء المسموح به للتركيب هو 10 أضعاف القطر الخارجي للكابل.
• الأداء الفني
الأداء الكهربائي
العمل الجهد |
AC3000V |
Conductor DC resistance (signle-wire) (Ω/km)(+20℃) |
≤15 |
Insulation resistance (MΩ·km) (DC500V) |
≥500 |
Insulation electrical strength between wires (DC 9000V, 2min) |
لا انهيار |
أداء الوحدة البصرية
Optical attenuation (dB/km) |
≤0.50@1310nm |
الأداء الميكانيكي والمادي والبيئي
1 |
قوة الانهيار: ≥ 40kN |
2 |
Density: ≤ 0.994g/cm3 calculated value |