Optička čelična žica oklopni poprečni vodonepropusni kabel Spec

4-electrical and 1-optical Steel Wire Armored Transverse Watertight Cable Spec.

1. Strukturni dijagram

2. Type: HDGYG-(3×6.0+1×2.5+2×1B1) /300

3. Dizajn kablova 

1. Kabl za napajanje
1.1 Conductor: use stranded copper wire, 4 wires (3 wires of 6.0mm2, 1 wire of 2.5mm2).
1.2 Insulation: made of compound insulation, special high temperature resistant material, heat resistance≥120℃.

2. Cabling: refer to the figure.

3. Sheath: polyethylene, nominal outer diameter :18.0mm.

4. Reinforced layer: reinforce by steel wire double-layer reverse stranding with high strength.

5. Cable nominal outer diameter: 25.0mm.

• Glavne aplikacije

This cable is used for power supply and signal transmission of underwater equipment in the ocean, can be dragged, can be winded for unwinded repeatedly.

• Uslovi rada

1. Radna temperatura okoline: -20℃～+80℃;
2. Minimalni dozvoljeni radijus savijanja za ugradnju je 10 puta veći od vanjskog prečnika kabla;

• Tehničke performanse

Električne performanse 

Mehaničke, fizičke i ekološke performanse