EN
logologo

facebook LinkedIn

EN

Banner sa Chonghong Industries Ltd.

nga kategoriya Product

Ang Optical Steel Wire Armored Transverse Watertight Cable Spec

4-electrical and 1-optical Steel Wire Armored Transverse Watertight Cable Spec.

1. Diagram sa istraktura

4-electrical and 1-optical Steel Wire Armored Transverse Watertight Cable Spec.

2. Type: HDGYG-(3×6.0+1×2.5+2×1B1) /300


3. Paglaraw sa cable

1. Kable sa kuryente
1.1 Conductor: use stranded copper wire, 4 wires (3 wires of 6.0mm2, 1 wire of 2.5mm2).
1.2 Insulation: made of compound insulation, special high temperature resistant material, heat resistance≥120℃.

2. Cabling: refer to the figure.

3. Sheath: polyethylene, nominal outer diameter :18.0mm.

4. Reinforced layer: reinforce by steel wire double-layer reverse stranding with high strength.

5. Cable nominal outer diameter: 25.0mm.

• Panguna nga aplikasyon

This cable is used for power supply and signal transmission of underwater equipment in the ocean, can be dragged, can be winded for unwinded repeatedly.

• Kondisyon sa pagtrabaho

1. Pagtrabaho sa temperatura sa palibot: -20 ℃ ~ + 80 ℃;
2. Ang minimum nga gitugotan nga radius sa bending alang sa pag-instalar mao ang 10 ka beses sa gawas nga diameter sa kable;

• Teknikal nga paghimo

Pasundayag sa elektrisidad

Working boltahe

AC3000V

Conductor DC resistance (6.0mm2) (Ω/km)(+20℃)

≤3.2

Conductor DC resistance (2.5mm2) (Ω/km)(+20℃)

≤7.5

Insulation resistance (MΩ·km)(DC500V)

≥500

Insulation electrical strength (DC 10000V, 2min)

Wala’y pagkabungkag

Ang paghimo sa mekanikal, pisikal ug kinaiyahan

1

Cable weight: about 1900 kg/km (in the air)

2

Kusug sa pagguba: ≥300kN

Pagbungkag sa lamesa sa Pag-load

optical Steel Wire Armored Transverse Watertight Cable Spec

optical Steel Wire Armored Transverse Watertight Cable Spec

Contact Us