4-electrical and 4-signal Steel Wire Armored Transverse Watertight Composite Cable Spec.
1. Strukturdiagramm
2. Type: HDXUG - 4×2+2×2×0.22
3. Kabeldesign
1. Stromkabel
1.1 Conductor: use stranded copper wire
1.2 Insulation: special high temperature resistant material, heat resistance≥120℃.
2. Signal wire
2 sets, characteristic impedance 100Ω±15Ω;
3. Cabling: refer to the figure.
4. Sheath: polyurethane, nominal outer diameter :11.0mm.
5. Reinforced layer: reinforce by stainless steel wire (the outer diameter of 1.2mm and 1.4mm) double-layer reverse stranding.
6. Cable nominal outer diameter: 16.0mm±0.3mm.
• Hauptanwendungen
Dieses Kabel wird zur Stromversorgung und Signalübertragung von Unterwassergeräten im Ozean verwendet.
• Arbeitsbedingung
1. Arbeitsumgebungstemperatur: -20 ~ ~ + 80 ℃;
2. Der minimal zulässige Biegeradius für die Installation beträgt das 10-fache des Kabelaußendurchmessers.
• Technische leistung
Elektrische Leistung
Betriebsspannung |
AC500V |
Conductor DC resistance (single-wire) (Ω/km)(+20℃) |
≤9 (2.0mm2) |
≤82 (signal wire) |
|
Isolationswiderstand (MΩ · km) (DC500V) |
≥500 |
Insulation electrical strength between wires (DC 2000 V, 2min) |
Keine Panne |
Characteristic impedance of signal wire Ω |
100Ω ± 15Ω |
Mechanische, physikalische und Umweltleistung
1 |
Cable weight: about782g/m |
2 |
Bruchkraft: ≥ 65 kN |
3 |
Safe working load: ≤10kN |
Your company provides cable core, and our company provides stainless steel wire and the stranding, the price is,
85 RMB/m
The stainless steel wire is: 316 stainless steel wire