EN
logotipologotipo

Facebook LinkedIn

EN

Chonghong Industries Ltd Banner

Dragging Composite Steel Wire Armored Cable

3-electrical and 3-signal Dragging Composite Steel Wire Armored Cable Spec. for Ocean ROV

1. Diagrama de estrutura

3-electrical and 3-signal Dragging Composite Steel Wire Armored Cable Spec. for Ocean ROV

• Cable parameters

1. Electrical unit×3
1.1 Conductor: copper wire twisted strand;
1.2 Insulation: special reinforced voltage resistant material.
2. Optical unit: stainless steel tube
3. Cabling: refer to the figure, add padding to be cable wrap.
4. Sheath: special reinforced material.
5. Reinforcing part: hot dip galvanized steel wire, direction of lay for inner layer is right, direction of lay for outer layer is left.
6. Outer diameter: 17.3 mm±0.3mm

• Condición de traballo

1. Working temperature: -20℃ ~ +80℃
2. Minimum allowable bending radius for installation: 350mm.

• Rendemento técnico

Electrical performance for electrical unit:

actuación

Working voltage (wire and wire

AC3000V

DC resistance Ω/km

≤4.9

Insulation resistance (MΩ·km) (DC500V) (wire and wire)

≥3000

Insulation electrical strength (DC 10000V, 5min (wire and wire)

Sen avaría

Optical unit performance

Optical fiber attenuation (dB/km)

≤0.50@1310nm

Rendemento mecánico, físico e ambiental

1. Breaking force: ≥205kN
2. Weight: about 1100kg/km
3. Transverse watertight: GJB 1916-1994 General specification for low smoke naval ship cable and cord

Táboa de carga de rotura

Dragging Composite Steel Wire Armored Cable

3-electrical and 3-signal Dragging Composite Steel Wire Armored Cable Spec. for Ocean ROV

Contacto