4-electrical and 6-optical Transverse Watertight Composite Cable Spec.
1. સ્ટ્રક્ચર ડાયાગ્રામ
2. Type: RTFK-6 6×1.3+4B1.3
3. કેબલ ડિઝાઇન
1. પાવર કેબલ
1.1 Conductor: use stranded copper wire7×0.48.
1.2 Insulation: special high temperature resistant material, heat resistance≥125℃ nominal outer diameter :3.1mm.
2. Optical unit (4-core) optical fiber: single-module G652, 4-core, steel tube 1.5mm+Sheathnominal outer diameter 3.1mm.
Cabling: refer to the figure, wrapping aluminum plastic composite belt, nominal outer diameter :9.5mm.
3. Inner sheath: polyurethane, nominal thickness: 1.2mm, nominal outer diameter :11.9mm.
4. Reinforced layer: reinforce by aramid knitted, nominal outer diameter: 13.1mm.
5. Outer sheath: foam TPE, nominal outer diameter :22.5mm.
• મુખ્ય એપ્લિકેશન
This cable is used for power supply and signal transmission of underwater equipment in the ocean.
• ચાલુ પરિસ્થિતિ
1. કાર્યકારી આસપાસનું તાપમાન: -20℃~+70℃;
2. ઇન્સ્ટોલેશન માટે લઘુત્તમ સ્વીકાર્ય બેન્ડિંગ ત્રિજ્યા કેબલના બાહ્ય વ્યાસના 10 ગણી છે;
• ટેકનિકલ કામગીરી
વિદ્યુત પ્રદર્શન
કામ વોલ્ટેજ |
AC3000V |
Conductor DC resistance (signle-wire) (Ω/km)(+20℃) |
≤15 |
Insulation resistance (MΩ·km) (DC500V) |
≥500 |
Insulation electrical strength between wires (DC 9000V, 2min) |
કોઈ ભંગાણ |
Optical unit performance
Optical attenuation (dB/km) |
≤0.50@1310nm |
યાંત્રિક, ભૌતિક અને પર્યાવરણીય કામગીરી
1 |
બ્રેકિંગ ફોર્સ: ≥40kN |
2 |
Density: ≤ 0.994g/cm3 calculated value |
ક Copyrightપિરાઇટ 2016 ચોંગહોંગ ઇન્ડસ્ટ્રીઝ લિ. કંપની નોંધણી નંબર 2260632 - શરતો અને શરતો - ગોપનીયતા નીતિ - સાઇટમેપ