EN
logologo

Facebook Quantcast

EN

Chonghong Industrius Inc. Home

CATAFRACTATUS potentia cable Spec. Oleum enim bene Ultrasonic

CATAFRACTATUS potentia cable Spec. Oleum enim bene Ultrasonic

1. Structure diagram

CATAFRACTATUS potentia cable Spec. Oleum enim bene Ultrasonic

2. Type: YT-2*9.5/85


3. Cable design

1. Power cable
1.1 Inner conductor: stranded by vanished wire, Nominal cross-sectional area 9.6mm2.
1.2 Insulation: special high temperature resistant material, heat resistance≥125℃ nominal outer diameter :8.1mm.

2. Outer conductor: use copper wire braid structure, nominal outer diameter 9.2mm.

3. Sheath: special high temperature resistant material, heat resistance≥125℃, nominal outer diameter :12.2mm.

4. Reinforced layer: reinforce by steel wire stranding, nominal outer diameter : 16.6mm.

5. Outer sheath: rubber sheath, nominal outer diameter :19.5mm.

• Main applications

This cable is used for power supply and signal transmission of underwater equipment in the ocean.

• Working condition

1. Working ambient temperature: -20℃~+70℃;
2. The minimum allowable bending radius for installation is 10 times of the cable outer diameter;

• Technical performance

Electrical performance

Working intentione

AC3000V

Inner conductor DC resistance (Ω/km)(+20℃)

≤2.00

Outer conductor DC resistance (Ω/km)(+20℃)

≤2.15

Insulation resistance (MΩ·km)(DC500V)

≥500

Insulation electrical strength between inner and outer conductors (DC 10000V, 2min)

Insulation electrical strength between outer conductors and steel wires(DC 10000V, 2min)

Non naufragii

Mechanical, physical and environmental performance

1

Breaking force: ≥85 kN

2

Transverse water pressure (1MPa, 2h) (100m water depth) (sheath), no water leakage

Tabula fractionis Lond

CATAFRACTATUS potentia cable Spec. Oleum enim bene Ultrasonic

CATAFRACTATUS potentia cable Spec. Oleum enim bene Ultrasonic

Contact Us