EN
logologo

facebook Ënneschtgaass

EN

Banner Chonghong Industries Ltd.

Optical Steel Wire Armored Transversal Waasserdicht Kabel Spec

4-electrical and 1-optical Steel Wire Armored Transverse Watertight Cable Spec.

1. Struktur Diagramm

4-electrical and 1-optical Steel Wire Armored Transverse Watertight Cable Spec.

2. Type: HDGYG-(3×6.0+1×2.5+2×1B1) /300


3. Kabel Design

1. Stroumkabel
1.1 Conductor: use stranded copper wire, 4 wires (3 wires of 6.0mm2, 1 wire of 2.5mm2).
1.2 Insulation: made of compound insulation, special high temperature resistant material, heat resistance≥120℃.

2. Cabling: refer to the figure.

3. Sheath: polyethylene, nominal outer diameter :18.0mm.

4. Reinforced layer: reinforce by steel wire double-layer reverse stranding with high strength.

5. Cable nominal outer diameter: 25.0mm.

• Haaptapplikatiounen

This cable is used for power supply and signal transmission of underwater equipment in the ocean, can be dragged, can be winded for unwinded repeatedly.

• Aarbechtszoustand

1. Schaffen Ëmgéigend Temperatur: -20 ℃ ~ + 80 ℃;
2. De Minimum zulässleche Biegsradius fir d'Installatioun ass 10 Mol vum Kabel baussenzegen Duerchmiesser;

• Technesch Leeschtung

Elektresch Leeschtung

schaffen Volt

AC3000V

Conductor DC resistance (6.0mm2) (Ω/km)(+20℃)

≤3.2

Conductor DC resistance (2.5mm2) (Ω/km)(+20℃)

≤7.5

Insulation resistance (MΩ·km)(DC500V)

≥500

Insulation electrical strength (DC 10000V, 2min)

Keng Ënnerdeelung

Mechanesch, kierperlech an Ëmweltvirstellung

1

Cable weight: about 1900 kg/km (in the air)

2

Breaking Force: ≥300kN

Breaking Load Table

optical Steel Wire Armored Transverse Watertight Cable Spec

optical Steel Wire Armored Transverse Watertight Cable Spec

Kontaktéiert eis