Power Armored Cable Spec. for Ultrasonic Oil Well

Power Armored Cable Spec. for Ultrasonic Oil Well

1. Struktur Diagramm

2. Type: YT-2*9.5/85

3. Kabel Design

1. Stroumkabel
1.1 Inner conductor: stranded by vanished wire, Nominal cross-sectional area 9.6mm2.
1.2 Insulation: special high temperature resistant material, heat resistance≥125℃ nominal outer diameter :8.1mm.

2. Outer conductor: use copper wire braid structure, nominal outer diameter 9.2mm.

3. Sheath: special high temperature resistant material, heat resistance≥125℃, nominal outer diameter :12.2mm.

4. Reinforced layer: reinforce by steel wire stranding, nominal outer diameter : 16.6mm.

5. Outer sheath: rubber sheath, nominal outer diameter :19.5mm.

• Haaptapplikatiounen

Dëse Kabel gëtt fir Stroumversuergung a Signaliwwerdroung vun Ënnerwasserausrüstung am Ozean benotzt.

• Aarbechtskonditiounen

1. Aarbechtsëmfeldtemperatur: -20℃～+70℃;
2. De Minimum zulässlechen Béie Radius fir d'Installatioun ass 10 Mol vum Kabel baussenzegen Duerchmiesser;

• Technesch Leeschtung

Elektresch Leeschtung

schaffen Volt	AC3000V
Inner conductor DC resistance (Ω/km)(+20℃)	≤2.00
Outer conductor DC resistance (Ω/km)(+20℃)	≤2.15
Insulation resistance (MΩ·km)(DC500V)	≥500
Insulation electrical strength between inner and outer conductors (DC 10000V, 2min) Insulation electrical strength between outer conductors and steel wires(DC 10000V, 2min)	Keng Ënnerdeelung

Mechanesch, kierperlech an Ëmwelt Leeschtung

1	Breaking force: ≥85 kN
2	Transverse water pressure (1MPa, 2h) (100m water depth) (sheath), no water leakage

EROFLUEDEN PRODUIT DATABLAD KONTAKT US FIR PRÄISEN

Power Armored Cable Spec. for Ultrasonic Oil Well

Kontaktéiert eis