EN
logologo

ເຟສບຸກ linkedin

EN

ບໍລິສັດ Chonghong Industries Ltd. ປ້າຍໂຄສະນາ

ປະເພດຜະລິດຕະພັນ

ສາຍເຊືອກແລະສາຍໄຟ

Hardware Rigging

ລວດລວດລວດ

ຕ່ອງໂສ້ອຸດສາຫະ ກຳ

ອຸປະກອນແລະອຸປະກອນຍົກ

ວັດສະດຸອຸດສາຫະ ກຳ ເຕັກໂນໂລຢີສູງ

ອາໄຫຼ່ລົດໃຫຍ່ແລະອຸປະກອນເສີມລົດຈັກ

Instruments

ລວດລວດລວດລວດລວດເຫຼັກ

3-electrical and 3-signal Dragging Composite Steel Wire Armored Cable Spec. for Ocean ROV

1. ແຜນວາດໂຄງສ້າງ

3-electrical and 3-signal Dragging Composite Steel Wire Armored Cable Spec. for Ocean ROV

• Cable parameters

1. Electrical unit×3
1.1 Conductor: copper wire twisted strand;
1.2 Insulation: special reinforced voltage resistant material.
2. Optical unit: stainless steel tube
3. Cabling: refer to the figure, add padding to be cable wrap.
4. Sheath: special reinforced material.
5. Reinforcing part: hot dip galvanized steel wire, direction of lay for inner layer is right, direction of lay for outer layer is left.
6. Outer diameter: 17.3 mm±0.3mm

•ສະພາບການເຮັດວຽກ

1. Working temperature: -20℃ ~ +80℃
2. Minimum allowable bending radius for installation: 350mm.

•ປະສິດທິພາບດ້ານວິຊາການ

Electrical performance for electrical unit:

ການປະຕິບັດ

Working voltage (wire and wire

AC3000V

DC resistance Ω/km

≤4.9

Insulation resistance (MΩ·km) (DC500V) (wire and wire)

≥3000

Insulation electrical strength (DC 10000V, 5min (wire and wire)

ບໍ່ມີການແບ່ງແຍກ

Optical unit performance

Optical fiber attenuation (dB/km)

≤0.50@1310nm

ການປະຕິບັດກົນຈັກ, ກາຍະພາບແລະສິ່ງແວດລ້ອມ

1. Breaking force: ≥205kN
2. Weight: about 1100kg/km
3. Transverse watertight: GJB 1916-1994 General specification for low smoke naval ship cable and cord

Breaking Load Table

ລວດລວດລວດລວດລວດເຫຼັກ

3-electrical and 3-signal Dragging Composite Steel Wire Armored Cable Spec. for Ocean ROV

ຕິດ​ຕໍ່​ພວກ​ເຮົາ